Shopping Cart

0 item $0.00

My Cart -

0 item
My Cart: (0)
Categories

2.3W BA15S 3000K

$12.95

Availability: In stock

Quick overview

BA15S LED Bulbs Bayonet single contact base, 12 V LED bulb, not dimmable, not for use in totally enclosed fixtures; dry location only. T3 replacement. BA15S Warm White - $12.95 each
Qty:

BA15S, G4 and G9 LED Replacement Bulbs

T3 and T4 LED replacement bulbs for hot, short lived halogen lamps.

Halogen bulbs provide a great light output, but they can be tricky for a number of reasons. First of all, they tend to burn hot and do not have such a great life span. You have to use care not to touch the bulb as oil from your fingers can cause a halogen bulb to have an even shorter life span or burn out immediately, or even melt. You have no such worries with LED replacement bulbs.

We have three types in stock: Shown above from left to right -

BA15S LED Bulb - This is a bayonet single contact base which twists and locks into place. It is a 12 V LED bulb, not dimmable, and is not not for use in totally enclosed fixtures. Use our LED BA15S in dry locations only. It is a T3 replacement.

JC/G4 LED Bulb - This is a two pin G4 base. It is a 12 V LED bulb, not dimmable, and not for use in totally enclosed fixtures. Use our LED JC/G4 bulbs in dry locations only. It is a T3 replacement.

G9 LED Bulb - This is a two pin G9 base. It is a 120VAC input LED bulb, it is dimmable. It is not for use in totally enclosed fixtures. Use in dry locations only. It is a T4 replacement.

How to make sure these LED halogen bulbs replacements will fit your fixture:

Your bulb should be clearly marked, but if it isn't:

First determine the voltage. Our BA15S and G4 bulbs operate at 12V. There are halogen bulbs out there at 24 and 48 volts, so be sure yours is 12V before you proceed. Warranty does not cover burning out a 12V bulb by applying 24 or 48 volts to it. Our G9 bulbs are 120VAC only.

Input voltage 12V

Power consumption: 2.3 Watts

T3 Replacement

Not dimmable

Dimensions: 2" L x 0.38" Dia

Lumen output: 180 lumens; 20 W incandescent equivalent

Average rated hours: 15,000

CCT: 3000K warm white

CRI 80

Beam Spread: 360 degree omnidirectional

Certifications: RoHS; ETL or UL

* 3 year limited warranty