|
LED
TriStar and 9 Star
Weatherproof Miniature Fixtures
|
The Tri-Cluster and 9Star
are a line of weatherproof (waterproof but not submersible) exterior and interior
light fixtures utilizing three (3) or nine (9) Nichia 3mm, 70 degree, 780mcd
white LEDs for an even, wide light distribution. Fully potted, it can be used
just about anywhere. For a softer, wider lighting, the Tri-Cluster
head can be filled with the #31 Silicon Diffuser lens. Case or body mount
is 316 Stainless Steel or raw brass, with the 3 segment flexible stalk
on certain models. |
|
#SC TriStar w/Stalk Stainless Steel. Dimensions are .494 inch ball end diameter. 2.0 inches long x .50 inch diameter barrel. Three (3) Nichia 3mm, 70 degree, 780mcd white LEDs for an even, wide light distribution. Current consumption is 20mA per cluster at 8-15vdc. Each cluster is fully potted for water proof applications.
#SC TriStar w/ Stalk at $24.96 each, 1 to 12 pieces.
|
|
#DM 370-Brass Ball.. Dimensions are 1.125 ball diameter. 1.2 inches tall ball height x .75 shank height x .520 shank diameter. Three (3) Nichia 3mm, 70 degree, 780mcd white LEDs for an even, wide light distribution. Current consumption is 20mA per cluster at 8-15vdc. Each cluster is fully potted for water proof applications. #DM 370-Brass at $34.00 each
|
#DM 360-Brass. Dimensions are .494 ball diameter. 1.75 inch length x .50 inch dimameter barrel. Three (3) Nichia 3mm, 70 degree, 780mcd white LEDs for an even, wide light distribution. Current consumption is 20mA per cluster at 8-15vdc. Each cluster is fully potted for water proof applications. #DM 360-Brass w/3" Stalk at $25.60 each
|
| Click here for Tri-Cluster beam projection notes. |
| Wire Splicing Steps for Tri-Clusters and 9StarsLights! Wiring Diagram suggestion for 6 or more fixtures. |
SC 9 Star Stainless Steel. Dimensions are .494 ball diameter. 1.75 inches long x 1.0 diameter head. Nine (9) Nichia 3mm, 70 degree, 780mcd white LEDs for an even, wide light distribution. Current consumption is 60mA per cluster at 8-15vdc. Each cluster is fully potted for water proof applications. #SC 9 Starw/4" Stalk at $52.98 each, 1 to 12 pieces.
|

|
The SC 9 Star Stainless can have the LL-FB Base attached in place of the holder w/nut. It can have the single segment or the 3 piece segment.
SC 9 Star @ $69.48 each or less.
|
 |
DM XR-F Floodlight is a gloss black coated aluminum case fixture.
LED: Single Cree 1 watt LED
Lumen: 50 lumen
Power Consumption: 350mA - constant current driver.
View Angle; 110 degrees
Light Output: Approx. 20 watts of light - 6000k
Light Projection: 4.25 feet diameter at 2 feet distance
Dimmable: Yes
Operating Voltage: 5vdc up to 15vdc.
Measures: 2" long x 1" in diameter; 4.25" overall |
Item is supplied with an LL-FB Base, 1 segment and one double-socket on a 1.8 LL Con (1/8") threaded connector piece. Available in black only but can be repainted to any color.
Although the face of the XR-F is waterproof, the back end is not waterproof until the bottom end (the 1.8 LL CON) is filled with epoxy or a top quality silicon adhesive! This is done before you install the fixture by unthreading the 1.8 LL CON fitting and filling the bottom end of the XR-F.
NOT polarity protected! Must connect red from DM XR-F to red or to the black with white stripe on the transformer or dimmer, and black to solid black from the transformer or dimmer. Tape/seal the WHITE Wire lead end to any of the other wires. It is not used/not to be used in normal applications. |
| DM XR-F Floodlight - Black Only |
|
For transformers and dimmers, click here. The Transformer 1 will handle up to 13 pieces 9Star or 40 pieces Tri-Cluster. |
DM #37 Brass Coupling and DM #38 Brass Nipple
1/4" IPS extension for #302 and #370 at $1.50 each |
DM #37 Coupling |
DM #38 Nipple |
| |
DM #36 Brass Mtg. Plate for 302 and 370 only
2" x 3/16" thick x 1/4" threaded
hole at $7.80 each
|
|
DM #20 Stalk 6 segment - 4.5 inches at $2.60 each
|
|
DM #21 Stalk Segment Tool to add or remove segments $10.95 each
|
Double Socket measures 0.75" long by 1/4" ID. Black only. $1.50 ea. |
 |
DM #30 Garden Stake
Shown
with #360 Tri-Cluster Stalk Light (not included). The stake is 12"
long, 1/8" diameter and made of 18-8 stainless steel. The loop
is adjusted to fit a 1/8" NPT pipe fitting as illustrated.
The loop in the stake can be opened to accept a 1/4" NPT fitting
as in the case of wiring an above ground wire splice system.$1.22
each
|
|
DM #31 Silicon Diffuser Lens. Fits all Tri-Clusters only! Provides warm white color. $1.60 each
|
|