Adjustable LED Project Flood Lights - USA LED Products
120VAC direct wire and Solar/Battery Ready LED Project Flood Lights
High power adjustable Cree LED portable project lights
are ideal for security for homes and buildings, stage lighting, wall washing, sign lighting, parking lots. Contractors and painters - very low heat generated. Weighs about 5 lbs. Ham radio operators and emergency personnel - solar and battery ready models available. Adjustable to 90 degrees. Click to enlarge alternate views.
3 models to choose from: 12VDC/VAC, 24VDC/AC, 85-260VAC. Made in the USA.
- 24 or 40 Cree XPG Series S2 5400K 180 lm per LED
- 160 degree evenly distributed light spread
- On board PWM duty 15% extends LED life over 70,000 hours
- Perforated waffle pack LED metal clad PCB design
- Honeycomb aluminum thermal coolant and protection
- Short circuit protection
- LED project Lights are adjustable to 90 degrees
- Comes with a protective grill for sports or work
- UV filtered glass prevents damage to inner components.
- Sealed with 30 year silicone tube type gasket.
- Body: cast aluminum alloy, security red
- 0.25" tempered frosted glass lens
- IP Rating: IP65, indoor or outdoor use
- Mounting hardware included
- Dimensions: 10" L x 9.25" W x 5.5" D
- RoHS compliant - no Pb or Hg
- Pro rated 5 year warranty
PLA 4024 LED Project Light
- Input voltage: 18-28 VDC or 17-25 VAC
- Draw: 28W
- Comparable Light Output: 500W
- Lumen Output: 5640 Lm
- 6 foot cord with bare wires
PLA 2412 LED Project Light
- Input voltage: 11.4-15VDC or 10.5-14 VAC
- Draw: 18W
- Comparable Light Output: 375W
- Lumen Output: 3880 Lm
- 6 foot cord with bare wires
PLA 40AC LED Project Light
- Input voltage: 85-260 VAC
- Draw: 38W
- Comparable Light Output: 500W
- Lumen Output: 5640 Lm
- 6 foot cord with 120VAC plug; can be cut off for hard wire applications
PLA 40AC 500W output; 40 LED 85-260VAC; $498.00; transformer not needed.
PLA 2412 375W output; 24 LED; 12V; $439.00 each
Requires a 12V transformer, not included. TX 5A 12V 4 Amp capacity $39.00 each
PLA 4024 500W output; 40 LED 24V; $498.00 each
Requires a 24V transformer, not included. PS 124, 3600mA capacity $46.95
The 12 and 24 V LED Project lights require the use of a transformer if you wish to run the project lights from line voltage. We carry a number of different 12 and 24 VDC transformers. You'll find those here. The LED Project lights are also suitable for use with solar systems, wind generation systems and other battery systems within the input voltage tolerances stated. Transformer help is here.
