Product Line:
LED Fixtures; Ceiling Fixtures
LED Ceiling Fixtures
 |
Moonglow
- White powder coat painted aluminum housing measures 4 3/8 diameter
x 1 1/4" tall; face diameter of 3 5/8". The Moonglow has 1 White LED
and is a great bathroom night light. On/Off switch on the base. 30mA
at 12vdc only.
Any remaining stock is now in our Bargain Basement. Click here to go there. |
| |
|
 |
COMET
- White
powder coat painted aluminum housing measures 4 3/8 diameter x 1 1/4"
tall; face diameter of 3 5/8". On/Off switch on the base. The COMET
has 3 White LEDs and is a good light for under the cabinet, hallways,
front or back porches, barns, tool sheds, outhouses, and RVs, planes
and boats. 30mA at 12vdc only.
Any remaining stock is now in our Bargain Basement. Click here to go there. |
| |
|
 |
MR28W
Ceiling Fixture is an MR-16 type flush mount LED fixture for remodeling
and new construction installation. This MR-16 Downlight fixture has
trim in off white only. Hole diameter required is 3 1/8 inches or
less. LED cluster installs from backside of fixture by press fit.
Click here for details and to order.
|
 |
The
CB24LS Under-Cabinet LED fixture uses a Cluster 24L2 as its light
source. This LED fixture is for remodeling and construction of new
kitchens. The flush mount CB24LS can also be used as a ceiling light
to accent specific areas or objects. Being totally sealed, it can
be used outdoors where the Brushed Nickel finish would add to the
overall aesthetics of the area. They will do great as under-eave lights
for normal roof height homes. Click here
for details and to order.
|
|
Power
LED Light Bulbs - 12vdc Powered
|
 |
Power LED
Light Bulbs
are a unique product. It is a light bulb but is hardwired to your
12vdc system. You can call it a fixture and that would be right
too. Whatever it is called, it is a great product that produces
excellent light color, radiation pattern and is simple to install.
No driver, no resistor is required as the components to run on 12vdc
are built in. If you do not have a 12vdc system a 110/120vac
to 12v DC transformer /converter is required.
The Power
Bulb B3 and B6 are offered in white with either 3 chip LEDs
producing 1 watt/25 lumen, or 6 chip LEDs producing 2 watts/50
lumen with actual output of 20+ and 40+ Watts of clear
white light! Install the Power Bulb B3 and B6 in existing
12vdc open fixtures, off-grid cabins/homes , or install them as
is for extra lights where you need them. Just be sure they are used
indoors or if outside, under the eaves or weather protected location.
They have built in heat dissipation holes so moisture cannot make
contact with the electrical circuit. Good in Rvs, boats, planes,
sheds, work benches, porch lights, truck berths and box, truck compartments.
Use as a battery powered light for camping, fishing trips, back
yard parties, emergency lights.
Power
LED Light Bulbs run on 10.8 - 13.2vdc battery power (boat, planes,
autos) or via a battery/control box/solar panel system. If you use
these on any vehicle that uses a alternator or generator, an in
line resistor or voltage regulator of some type is required to maintain
voltage to no more than 13.2vdc.
See the Informational
and Data Sheet for more information.
|
B-3 - $27.50
and less - White only |
B-6 - $50.50 and less - White, red, blue, green, amber |
|
|
|
 |
The NOVA
surface-mount light assembly is made of stainless steel. It has a
4 5/8" face diameter; 5 1/2" base diameter x 1 3/4" thick. An On/Off
switch is on the bottom of the base. These fixture are weatherproof
and great for building exteriors, outdoors, boating, planes and
RVs.
The Nova
is also available in bicolor - white with red, blue or green LEDs
and with a 3 way switch. Color combination is by threes - 3 white
with 9 color, 6 white with 6 color, 3 white with 12 color, 9 white
with 3 color, etc. Any remaining stock is now in our Bargain Basement. Click here to go there.
|
Requires 12.0 to 12.5VDC max. Be sure to order the correct transformer!
Click here to order your power supplies |