Flexible LED Strip connectors and couplers are fabricated by the factory to fit that factory's specific product. Our flexible LED Strip connectors and couplers will probably *not* fit flexible led strips you bought elsewhere. We know this from experience with different factories.
If you are purchasing Flexible LED Strips from us today and need just a couple of connectors, please email or call us.
If you have purchased Flexible LED Strips from us in the past and need additional flexible led strip connectors or couplers, we will be able to look up your original order and make sure we are sending you the correct connectors or couplers for the product you purchased. Please email us or give us a call at 1-775-841-4490.
If you did *not* purchase your Flexible LED Strips from us, you are best served to either solder your connections or order your flexible led strip connectors and couplers from the original source. We reserve the right to refuse large orders for our flexible led strip connectors and couplers from customers who have not purchased our flexible led strip product as we do not stock these by the zillions and must have ample stock to provide our flexible led strip customers. If you insist on purchasing our flexible led strip connectors and couplers, it is at your own risk that they will work with your product. Under NO circumstances are led strip connectors and couplers returnable.
Thank you for understanding our aim to provide great customer service to all.
The Strip Wire-Connector and the Strip Coupler are installed by sliding open the black clip section. Slip the Flexible LED Strip into the Connector or Coupler and make sure they are all the way in. Then slide the black clip closed.
Avoid unnecessary handling and twisting as the Strip can slip out of the Connector or Coupler. Secure Strips in place with the pre-attached self adhesive tape and that will hold the Connector or Coupler in place. The Strip Wire-Connector is used when you need to to make a 45 or 90 degree turn.