LED Lighting Controls - Voltage Doublers, Solar Charge Controllers, Motion Sensors

Zane® Control Products Voltage Doublers - USA LED Products

Take your DC power source and double it. The 6V voltage doubler is great for antique auto conversion to LED lights. An economical way to have 12vdc without the normal conversion cost. Items shown below are currently in stock. Others are special order, not returnable. For details and to order, see the Zane Controls Product Catalog. 90 day limited warranty

18905 2A 12VDC $63.90 ea 19105 7.5A 12VDC $119.00 ea

Other Zane Controls - USA Products

2 wire dimmers, low voltage AC dimmers, linear power supplies, motor speed controls, variable speed fan controls and temperature controls for heated clothing available by special order.Zane Controls Product Catalog.

Sunwize® SW-IL6 charge controller for 12v solar systems.

Rated for 6.0 amps. measures 1.25" x 1.5" x .40". Max application is up to a 40 watt solar panel. Instruction sheet included. 90 day limited warranty if used with a product purchased from TheLEDLight.com

SW-IL6 Charge Controller - 12.0vdc -- 6.0amp - $43.70 each

Sentry12 Motion Sensor

A "kit" type" add-on to the LED products we sell. Sentry12 connects to the LED fixtures from the ABS plastic mounting box, which is also the mounting box for the sensor. Installation requires a 12vdc power supply (transformer or battery) matched to the current load for the light fixtures. You could if required, install a dimmer but the dimmer will work only when the sensor has turned on the power. Installation is as follows: power supply to motion sensor, to dimmer (if required), to light fixtures.

12vdc power in and out 2.0 amp current load maximum Sensor range of 50 feet; 100° wide 90 Day Warranty

Sentry12 has three settings that are adjustable: Time: pre-set is for 10-20 seconds on time when the sensor senses movement. Shuts down after the preset time. Sensitivity: Set in middle and test for activation by pet/size. Decrease sensitivity to meet your own need. Increase sensitivity during winter so that it will work when multiple layers of clothing is worn. The Sentry12 will remain on as long as it senses movement/heat within its coverage area. Day - Night Setting: Moon is for night operation only. When fully turned to the right, it works during day only. Set it straight up for day and night operation. It will help the Sentry12 to work best if it is mounted under the edge of a house where it is dark but can see out where it is light. This is fully adjustable to work in any condition.

$35.00 each