Night Reader Flexible Neck LED Reading Lamp and Task Light

LED Reading Light with long, flexible neck and versatile C Clamp

 
LED Night Reader Clamp Light

Night Reader Flexible Neck LED Reading Lamp and Task Light

LED Night Reader has a sturdy clamp that will accommodate 2 1/2 inch thick mounting surface. The on/off switch is conveniently located on the head.

Operates at 120 to 250 VAC with a UL listed AC/DC transformer (included) - simply plugs into a wall outlet.

Flexible neck is sturdy and is 23.6" long. Point the light where you need it. See below for optional wall mount and desktop base accessories.

clean white light
night reader is all black
Wide clamp

Input Voltage: 100VAC-250VAC

Led Specifications: 1 ea 3W LED; 60 degree view angle.

Light Output: 130 lumens; equivalent to approximately a 20W halogen lamp

Produces a 3' circle of light from a distance of 13" from the lens with no ring, and a bright, 6" center.

Operating Temperature: -10C to 40C ( 14F to 104F)

Color Temperature: 6000-6500K Daylight White

CRI: 78

Current Consumption: 700mA

 

Body: Iron with black finish. Very sturdy flexible neck. Note that this light is not two toned as shown. It is all black!

Power Adapter: UL Listed, RoHS. Equipped with a US type, two prong plug. European customers will need to provide their own adapter.

Dimensions: Overall Lamp 23.62 ", Clip accommodates 2.56"; Head diameter 2.3 " x 0.50 W ", 6.5' cord. Click for dimensional drawing.

Operation: Plug it in to an outlet. Control it with the switch on the light head

Warranty: 1 year warranty does not cover breakage or abuse.

Night Reader Flexible Neck LED Reading and Task Light; $59.95 each
Get the whole set and save. (1) Night Reader with C clamp, (1) round base and (1) wall clamp. $77.77
round base optionOptional Round Base Accessory converts your Night Reader flexible neck LED light into a desk lamp. Stable and strong, the base weights about 1 1/2 lbs. Simply remove the C clamp and attach the base being careful not to cross-thread. $15.95 each

This Round Base Accessory is an extra part. The Night Reader comes with the C clamp as shown above. You simply remove the C Clamp and install the Base Accessory

wall mount accessory Optional Wall Mount Accessory - This accessory replaces the C clamp. It allows you to mount on a wall, headboard, etc. Click for dimensions. $5.25 each

This Wall Mount Accessory is an extra part. The Night Reader comes with the C clamp as shown above. You simply remove the C clamp and install the wall mount accessory.