TheLEDLight.com
view cartget help with your project

Spotmod® Indoor/Outdoor Architectural Grade LED Accent Lighting with ETL Listing

ETL Listed 12VDC LED light fixtures for either surface mounting or recessed mounting are IP65 rated for wet locations (not submersible)

spotmod surface mountable fixture

Spotmod ® for Surface Mounting

spotmod recessed gimbal led light

Spotmod® Recessed Gimbal

Spotmod® 12VDC LED Light Fixtures

Your choice of either the Spotmod ® fixture shown on the left for surface mounting or the Spotmod® Gimbal for recessed mounting shown at right. We offer two color temperatures and two view angles to provide the light concentration you need for your accent lighting project. These architectural grade LED accent lights are constructed of sturdy aluminum and can be installed indoors or outdoors. You get a lot of light output in a small package.

General Specifications:

  • Input Voltage: 12VDC constant voltage.
  • Power Consumption: 2.13W/176mA
  • LEDs: 3 Nichia 3030 LED chips per fixture
  • Beam Angle: 15 or 45°. The recessed gimbal is adjustable +/- 20°
  • Connections: 36" female wet location plug (9mm dia) 22/2 AWG UL 2468 wire
  • Dimmable. Brushed Aluminum Finish.
  • Ambient Temp: -4 to 122° F
  • Environment: Outdoor/Wet Location IP 65. Not submersible, not for inground installation, not for use in or around chlorinated/treater water.
  • Lumen output: 3000K 45° 130 lm; 15° 134 lm; 5000K 45° 163 lm; 15° 167 lm
  • Modular wet location accessories available.

Spotmod® Specific

Spotmod® Recessed Gimbal Specific

Certifications:

  • ETL Listed (US and Canada) 4001928, UL 2108 low voltage luminaire, CSA C22.2 #250.0

3 year limited warranty

9mm Wet Location Accessories

Modular connector system makes it easy for you to customize your installation.

M-F extension cable

Wet Location Male to Female Extension Cables 6, 12 or 24" long creates an extension between fixtures

wet location splice connectors

Wet Location Splice Connector Pair connects fixtures to a power source or two conductor wire

wet location splitters

2, 3 or 5 way splitters Dimensions: 8.5 x 0.6 x 0.3 in. (L x W x H) Connector width: 0.3 in.. Splits a connection for 9mm wet location accessories

Spotmod ® for Surface Mounting

Choose 15 or 45 degree angle

Choose 3000K or 5000K

$48.90 each

Spotmod® Recessed Gimbal

Choose 15 or 45 degree angle

Choose 3000K or 5000K

$52.25 each

Order Cables, Splices and Splitters

Priced as below

Order your Power Supply

TX1A is non waterproof, plug in type. Powers up to 4 fixtures. TX-WP-12V-60W is hard wire waterproof type. Powers up to 25 fixtures. Yes we have others.

Important Notes:

  • Allow 3-4 business days for this product to ship.
  • Attached connectors and connector accessories are not rated for in-wall installation. Attached connectors are field cuttable.
  • Do not install product in an environment outside the listed ambient temperature range. Exceeding the maximum ambient temperature may damage LED chips, reduce the total lamp life, lumen output and/or adversely affect color consistency.
  • Do not install in or around chlorinated/treated water. This product is not submersible. Suitable for installation in direct sunlight. Do not install in location where water may pool or collect.
secure certificate
find us on facebook
follow us on twitter
view cart check out